Shiseido Maquillage Lasting Foggy Brow EX (CT)

●Please set it in the "Makiage Eyebrow Holder" sold separately.

<How to set it into a holder>
●If you have a hole in the "Maquillage Eyebrow Holder", please insert the cartridge (this product) until it clicks and set it. ( Figure 1)
●If you remove the attached cap, you can also set the tools.

<How to use>
●Please turn the cap of the cartridge (*1) to the direction of the arrow (OPEN mark) and remove it. ( Figure 2)

●After that, turn the holder to the right, and use it after scooping out the core about 1 to 2 mm. ( Figure 3)
Because of the soft core, be careful not to put it out too much.
●After use, return the core to the original, turn the cap and close it properly so that there is no gap. ( If you keep it closed, the core will break, it will become hard, and it will be difficult to draw.)
●Because it is an eyebrow that is hard to fall off, we recommend using an oil-based eye makeup remover when removing it.
●When replacing the core, please pull out the cartridge (this product) from the holder and insert a new product.

Precautions for use

◇After use, turn the cap and close it properly so that there is no gap. ( If you keep it closed, the core will break, it will become hard, and it will be difficult to draw.)
◇Please note that the core is soft, so it may break due to the impact caused by over-out or falling.
◇If you put it on clothes, it won't fall off, so please be careful not to stick.
◇Please do not place it in the sun or in the hot place.

Ingredient

Cyclopentasiloxane, polyethylene, trimethylsiloxysilicic acid, fatty acid (C18-36) glycol, (acrylates / stearyl acrylate / dimethicone methacrylate) copolymer, cellulose, (vinyl dimethico) N/Méticoncil cecycaoxane) crosspolymer, lauroyl lysine, hydroxide Al, dimethicone, mica, iron oxide, titanium oxide